TP8481

±12K ESD Protection, Dedicated RS-485 Driver or Receiver

数据手册

概述
开发资源
应用
订购明细

概述

The TP8481/0 is 3V~5.5V powered transceivers that meet the RS-485 and RS-422 standards for balanced communication. Driver outputs and receiver inputs are protected against ±12kV ESD strikes without latch-up.

Transmitters in this family deliver exceptional differential output voltages (2.5V min/5Vcc), into the RS-485 required 54Ω load, for better noise immunity, or to allow up to eight 120Ω terminations in “star” topologies. These devices have very low bus currents so they present a true “1/8 unit load” to the RS-485 bus. This allows up to 256 transceivers on the network without using repeaters.

Receiver (Rx) inputs feature a “Full Fail-Safe” design, which ensures a logic high Rx output if Rx inputs are floating, shorted, or on a terminated but undriven bus. Rx outputs feature high drive levels - typically 25mA @ VOL = 1V (to ease the design of optocoupled isolated interfaces).

The TP8481/0 is available in an SOP8 package, and is characterized from –40°C to 125°C.

Status

Production
Rating

Industrial
Drivers Per Package

1
Receivers Per Package

0
VCC (Min) (V)

3
VCC (Max) (V)

5.5
Data Rate (Max) (kBPS)

250
ICC (Max) (mA)

0.35
ESD HBM (kV)

12
IEC-61000-4-2 Contact (kV)

N/A
Operating Temperature Range (℃)

-40 to +127
Package

SOP8

开发资源

文档

显示筛选器

隐藏筛选器
文档
- 数据手册
- 选型手册
- 应用笔记
- 技术文章
- 用户指南
- 测试报告
- 文档名称
- 类型
- 语言
- 日期
- Datasheet_TP8480-TP8481
  
  数据手册
  
  英文
  
  06/03/2024
  
  ±12K ESD Protection, Dedicated RS-485 Driver or Receiver
- Introduction to Latch-up and the Preventive Measures
  
  技术文章
  
  英文
  
  01/19/2024
- Automatic Correction Scheme of RS-485 Communication Bus Cross-Wire Fault
  
  技术文章
  
  英文
  
  01/19/2024
- Application Tips on ESD-EOS
  
  技术文章
  
  英文
  
  01/19/2024
- 3PEAK Analog Products Selection Guide
  
  选型手册
  
  中文
  
  01/19/2024