TPV8348

Nano Power Supervisory Circuits with Programmable Reset Delay

数据手册

概述
开发资源
应用
订购明细

概述

The TPV8348 is a family of supervisory circuits to monitor a voltage rail, asserting an active low or active high RESET /RESET output when the voltage of the VDD pin (Fixed version) or SENSE pin (Adjustable version) drops below the threshold or when the manual reset pin MR is logic low. The RESET /RESET output remains low or high for the duration of the delay time after the detected voltage returns above the threshold with a hysteresis or manual reset MR returns to logic high. The delay time can be set by an external capacitor.

The threshold voltage of the TPV8348 device can achieve 1% accuracy. The delay time can be set to 30 μs to 6.2 s by connecting the external capacitor to the CT pin. The TPV8348 family has a very low typical quiescent current of 400 nA.

The TPV8348 is available in SOT23-5 and DFN1.5x1-6 packages. Its operating temperature range is from -40°C to +125°C.

Status

Production
Rating

Industrial
Power Consumption (μA)

0.4
Power Supervisor

Yes
Manual Reset Input

Yes
Watchdog

/
Power Fail Input (PFI)

/
Reset Timeout Period (mS)

Programmable
Watchdog Timeout Period （S）

/
Reset Output Polarity

Low Active or High Active
Reset Output Type

Push-Pull, Open Drain
Temperature Range (℃)

-40 to +125
Package

DFN1.5X1-6

开发资源

文档

显示筛选器

隐藏筛选器
文档
- 数据手册
- 选型手册
- 应用笔记
- 技术文章
- 技术参考手册
- 产品简介
- 解决方案参考手册
- 用户指南
- 快速启动指南
- 勘误表
- 测试报告
- 文档名称
- 类型
- 语言
- 日期
- Datasheet_TPV8348
  
  数据手册
  
  English
  
  02/02/2024
  
  Nano Power Supervisory Circuits with Programmable Reset Delay
- Introduction to Latch-up and the Preventive Measures
  
  技术文章
  
  English
  
  01/19/2024
- Application Tips on ESD-EOS
  
  技术文章
  
  English
  
  01/19/2024
- 3PEAK Analog Products Selection Guide
  
  选型手册
  
  English
  
  01/19/2024